• 电话:0531-81187299
  • 传真:0531-81187399
  • 手机:13864039017
  • 邮箱:gljia_gm@163.com
  • 地址:济南市高新区正丰路(济南赛信机械厂院内)
技术文章当前位置:首页-技术文章
    汽车防盗系统锁住启动不了怎么处理?
    来源:http://www.oubaoqx.com/ 发布时间:日期:2024-04-01

    汽车防盗系统出现锁死导致启动困难的情况,可以尝试以下方法:

    If the car anti-theft system is locked and difficult to start, the following methods can be tried:

    1. 面对车门锁闭被禁用引发的报警声,迅速使用钥匙打开车门,等待片刻即可停止报警。

    1. When facing the alarm sound triggered by the door lock being disabled, quickly use the key to open the door and wait for a moment to stop the alarm.

    2. 研究发动机罩下的报警器位置,并予以关闭。

    12

    2. Study the position of the alarm under the engine hood and turn it off.

    3. 寻找位于方向盘下方的保险丝盒,谨慎拆除与报警器相关的保险丝。

    3. Find the fuse box located below the steering wheel and carefully remove the fuses related to the alarm.

    4. 如上述方式未奏效,考虑断开电池或求助4S店维修。

    If the above methods are not effective, consider disconnecting the battery or seeking professional repair from a 4S store.

    建议和注意事项:

    Suggestions and precautions:

    1、若对以上方法不够自信,建议及时寻求拖车服务。普通维修店可能面临无法解锁的困境,因为缺乏必要密码信息。

    1. If you are not confident enough in the above methods, it is recommended to seek towing services in a timely manner. Ordinary repair shops may face the dilemma of being unable to unlock due to a lack of necessary password information.

    2、强烈建议前往4S店寻求帮助,他们配备工具重新调整防盗系统。

    2. It is strongly recommended to go to the 4S store for assistance, as they are equipped with professional tools to readjust the anti-theft system.

    此外,考虑到防盗系统启动导致无法发动车辆的情形:

    In addition, considering the situation where the anti-theft system is activated and the vehicle cannot be started:

    1、车钥匙内嵌身份识别号码需与发动机相符,否则需要重新匹配。

    1. The identification number embedded in the car key must match the engine, otherwise it needs to be matched again.

    2、点火钥匙的识别线圈如有故障,则需要更换新部件。

    2. If the identification coil of the ignition key is faulty, a new component needs to be replaced.

    3、若发动机防盗系统数据出现混乱,可尝试重连发动机蓄电池进行启动测试。

    3. If there is confusion in the engine anti-theft system data, you can try reconnecting the engine battery for a start test.